VT

制御機能

[1] Digital VT100 User Guide: Programmer Information, 2022-04-30T08:09:14.000Z https://vt100.net/docs/vt100-ug/chapter3.html

[29] VT100.net: Private Control Functions used by DEC, 2022-04-30T09:23:32.000Z https://vt100.net/emu/ctrlfunc_dec.html

[30] Wayback Machine, 2022-04-30T09:23:48.000Z https://web.archive.org/web/20110103061225/http://web.eecs.utk.edu/~shuford/terminal/vt100_reference_card.txt

[2] Wayback Machine, 2022-04-30T08:09:52.000Z https://web.archive.org/web/20110103061220/http://web.eecs.utk.edu/~shuford/terminal/vt100_codes_news.txt

[3] VT52 - Wikipedia, 2022-04-19T00:08:20.000Z, 2022-04-30T08:10:08.734Z https://en.wikipedia.org/wiki/VT52

[26] BIOS, 2022-04-30T09:19:44.000Z, 2013-06-21T03:27:05.995Z https://web.archive.org/web/20130621030502/http://www.yardley.cc/atari/compendium/atari-compendium-chapter-3-BIOS.htm#vt52emulator

[46] Man page of CONSOLE_CODES, 2022-04-29T09:33:30.000Z, 2022-04-30T10:00:50.991Z https://linuxjm.osdn.jp/html/LDP_man-pages/man4/console_codes.4.html

[68] Wayback Machine, 2022-04-30T12:25:52.000Z https://web.archive.org/web/20010221071255/http://www.cs.utk.edu/~shuford/terminal/villanova-vt100-esc-codes.txt

[94] Wayback Machine, 2022-04-30T12:50:11.000Z https://web.archive.org/web/20010109234500/http://www.cs.utk.edu/~shuford/terminal/ansi_dec_controls_news.txt

[48] 2022-04-30T10:23:59.000Z https://webcache.googleusercontent.com/search?q=cache:6oc699y1XfUJ:ftp://ftp.chiark.greenend.org.uk/users/bjharris/all-escapes/all-escapes.txt

[103] Xterm Control Sequences, 2008-12-29T17:58:30.000Z, 2022-05-01T01:22:51.583Z https://www.xfree86.org/current/ctlseqs.html

[4] VT100 control characters >>1

	0	1	7
0	`NULL`
1		`XON`
2
3		`XOFF`
4
5	`ENQ`
6
7	`BEL`
8	`BS`	`CAN`
9	`HT`
10	`LF`	`SUB`
11	`VT`	`ESC`
12	`FF`
13	`CR`
14	`SO`
15	`SI`		`DEL`

[10] ESC F >>1

	3	4	5	6	7
0					{Reverse video}
1	((`DECHTS`)) {{`DECGON`}}	Cursor Up			{Normal video}
2	((`DECCAHT`)) {{`DECGOFF`}}	Cursor Down		{Foreground color}
3	((`DECVTS`))	Cursor Right		{Background color}
4	((`DECCAVT`))	Cursor Left		{Clear to start of screen}
5	((`DECXMIT`))	{Clear screen}		{Enable cursor}
6	((`DECBI`))	Enter Graphics Mode		{Disable cursor}	{Wrap on}
7	`DECSC`	Exit Graphics Mode			{Wrap off}
8	`DECRC`	Cursor to Home
9	((`DECFI`))	Reverse Line Feed	Direct Cursor Address
10		Erase to End of Screen	`DECID` = Identify	{Save cursor}
11		Erase to End of Line		{Restore cursor}
12	Enter ANSI Mode	(Insert line)		{Clear line}
13	`DECKPAM` = Enter Alternate Keypad Mode	(Delete line)
14	`DECKPNM` = Exit Alaternate Keypad Mode
15				{Clear to start of line}

[20] 文字の名前形式は ANSI Mode, 英語の名前は VT52 Mode
[22] () のものは VT52 にある >>3 が VT100 の VT52 mode >>1 になし
[27] {} のものは VT52 mode の TOS 拡張 >>3, >>26
[35] {{}} のものは VT105 >>29
[34] (()) のものはその他 >>29

[19] Direct Cursor Address - ESC Y line column (line, column = integer + 0x1F) >>1
[28] Foreground color, Background color は次の1バイトの下位4ビットが色を表す >>3, >>26

[64] その他のもの:

[88] ESC ? - >>68
[72] ESC D - IND >>46
[73] ESC E - NEL >>46
[74] ESC H - HTS >>46
[75] ESC M - RI >>46
[70] ESC N - Switch to G1 >>68
[69] ESC O - Switch to G0 >>68
[95] ESC P - DCS (extended) >>48
[89] ESC P - PF1 (VT52 mode) >>68
[91] ESC Q - PF2 (VT52 mode) >>68
[92] ESC R - PF3 (VT52 mode) >>68
[93] ESC S - PF4 (VT52 mode) >>68
[81] ESC V - Print cursor line (VT52 mode) >>68
[82] ESC W - Enter print controller (VT52 mode) >>68
[83] ESC X - Exit print controller (VT52 mode) >>68
[84] ESC ] - Print screen (VT52 mode) >>68
[85] ESC ^ - Enter auto print (VT52 mode) >>68
[86] ESC - - Exit auto print (VT52 mode) >>68
- [87] _ カ
[71] ESC c - Hard Reset >>68, RIS >>46, >>103, >>125
[65] ESC d - Set colour table >>48
[66] ESC l - LMA (Lock memory above) >>48, Memory Lock >>103
[67] ESC m - USR (Unlock scrolling region) >>48, Memory Unlock >>103
[105] ESC n - LS2 >>103
[106] ESC o - LS3 >>103
[107] ESC | - LS3R >>103
[108] ESC } - LS2R >>103
[109] ESC ~ - LS1R >>103
[76] ESC { T filename CR - Transmit a file >>68
[77] ESC { R filename CR - Receive a file >>68
[78] ESC { A filename CR - Append to a file >>68
[79] ESC { S - Save collected text >>68
[80] ESC S - Save collected text >>68

[110] Tektronix 4014 mode >>103:

[111] ESC ETX - Switch to VT100 Mode (ESC Ctrl-C)
[112] ESC ENQ - Return Terminal Status (ESC Ctrl-E)
[113] ESC FF - PAGE (Clear Screen) (ESC Ctrl-L)
[114] ESC SO - Begin 4015 APL mode (ignored by xterm) (ESC Ctrl-N)
[115] ESC SI - End 4015 APL mode (ignored by xterm) (ESC Ctrl-O)
[116] ESC ETB - COPY (Save Tektronix Codes to file COPYyyyy-mm-dd.hh:mm:ss) (ESC Ctrl-W)
[117] ESC CAN - Bypass Condition (ESC Ctrl-X)
[118] ESC SUB - GIN mode (ESC Ctrl-Z)
[119] ESC FS - Special Point Plot Mode (ESC Ctrl-\)
[120] ESC 8 - Select Large Character Set
[121] ESC 9 - Select #2 Character Set
[122] ESC : - Select #3 Character Set
[123] ESC ; - Select Small Character Set

[36] 告知シーケンス >>29:

[37] ESC 2/0 3/6 - DECTC1 (Truncate C1 Controls); S7C1R (Select 7-bit C1 Reception)
[38] ESC 2/0 3/7 - DECAC1 (Accept C1 Controls); S8C1R (Select 8-bit C1 Reception)

[5] 私用制御機能:

[7] ESC 2/3 3/3 - DECDHL, Top Half >>1, DECDHLT >>126
[8] ESC 2/3 3/4 - DECDHL, Bottom Half >>1, DECDHLB >>126
[33] ESC 2/3 3/5 - DECSWL >>1, >>126
[9] ESC 2/3 3/6 - DECDWL >>1, >>126
[31] ESC 2/3 3/7 - DECHCP >>29
[6] ESC 2/3 3/8 - DECALN >>1
[32] ESC 2/3 3/9 - DECFPP >>29

[39] 独自の DOCS:

[40] ESC 2/5 3/0 - DECTCS (Exit NAPLPS) >>29
[41] ESC 2/5 3/4 - DECSCCS (Enter NAPLPS) >>29
[42] ESC 2/5 3/8 - DECHPPCL (Enter HP PCL emulation mode) >>29
[99] ESC 2/5 3/8 - UTF-8 (旧) >>46

[11] 独自の制御シーケンス >>1:

[12] ESC [ Ps q - DECLL Ps ∈ [ 0, 4 ]
[13] ESC [ <sol>; <par>; <nbits>; <xspeed>; <rspeed>; <clkmul>; <flags> x - DECREPTPARM
[14] ESC [ <sol> x - DECREQTPARM
[15] ESC [ Pn; Pn r - DECSTBM
[16] ESC [ 2 ; Ps y - DECTST
[47] ESC [ ... ] - Linux 独自 >>46
[96] その他 >>48

[18] 独自のモード:

[97] 3/15 M (M ∈ [ 0, 9 ]) >>1
[98] その他 >>48

[130] SGR も参照。

[17] 私用図形文字集合 (94集合):

[23] VT52 Graphics mode >>3 (VT100 の VT52 mode の Graphis Mode とは違う >>1)
[100] 3/0 Special Graphics >>1
[101] 3/1 Alternate Character ROM Standard Character Set >>1
[102] 3/2 Alternate Character ROM Special Graphics >>1
[50] 3/3 - HP Roman 8, upper 128 chars >>48
[51] 3/4 - Dutch character set >>48
[52] 3/5 - Finnish character set >>48
[53] 3/6 - Norwegian/Danish character set >>48
[54] 3/7 - Swedish character set >>48
[55] 3/8 - APL character set >>48
[56] 3/9 - French Canadian character set >>48
[57] 3/12 - DEC supplemental character set >>48
[58] 3/13 - Swiss character set >>48
[59] 3/14 - DEC Technical character set >>48
[60] Q - French Canadian character set >>48
[49] 2/2 3/1 - Digital Symbol character set >>48
[61] 2/5 3/5 - Digtal Supplemental Graphics set >>48
[62] 2/5 3/6 - Portuguese character set >>48
[63] 2/5 3/13 - Hebrew character set >>48

[90] >>46

ESC (		G0 文字集合を定義するシーケンスを開始する。
ESC ( B		    デフォルト(ISO 8859-1 マッピング)を選択する。
ESC ( 0		    VT100 グラフィクスマッピングを選択する。
ESC ( U		    ヌルマッピングを選択する - キャラクター ROM から直接マッピングする。
ESC ( K		    ユーザー定義のマッピングを選択する - そのマップ
    は mapscrn(8) ユーティリティーによってロードされる。
ESC )		G1 を定義するシーケンスを開始する。
(すでに述べたように B, 0, U, K のどれかが次に続く)

[104] >>103

C = 0 → DEC Special Character and Line Drawing Set
C = A → United Kingdom (UK)
C = B → United States (USASCII)
C = 4 → Dutch
C = C or 5 → Finnish
C = R → French
C = Q → French Canadian
C = K → German
C = Y → Italian
C = E or 6 → Norwegian/Danish
C = Z → Spanish
C = H or 7 → Swedish
C = = → Swiss

[132] Unicode support — The Linux Kernel documentation, 2021-04-25T21:06:20.000Z, 2023-04-12T05:10:48.900Z https://www.kernel.org/doc/html/v5.12/admin-guide/unicode.html

Map symbol Map name Escape code (G0)
LAT1_MAP Latin-1 (ISO 8859-1) ESC ( B
GRAF_MAP DEC VT100 pseudographics ESC ( 0
IBMPC_MAP IBM code page 437 ESC ( U
USER_MAP User defined ESC ( K
In particular, ESC ( U is no longer “straight to font”, since the font might be completely different than the IBM character set. This permits for example the use of block graphics even with a Latin-1 font loaded.